Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Austin
Gate repair in Austin usually means one of three things: a swing gate that won’t latch, a slide gate that grinds halfway and stops, or an opener that hums but doesn’t move the gate. Most jobs we handle in Austin run $180 to $340 for hinge and alignment work, $260 to $480 for opener and motor repair, and $600 to $1,400 when the whole post footing needs to be dug out and re-set in concrete. Those are written prices, agreed before any work starts. If you’re in Austin and your gate is acting up, call (361) 268-6253 and we’ll send a technician whose name and photo you’ll see before they arrive.
Why Warden Gate Repair Austin Is Austin’s Preferred Gate Repair Company
We don’t show up as a mystery van. Every Warden technician in Austin is background-checked, identity-verified, and photo-badged under what we call the Threshold Standard. You get the tech’s name and photo sent to your phone before the visit, and they’ll show the same photo ID at your door. For people who are home alone during the day, or parents with kids in the house, that detail matters more than any slogan.
Our Austin customers call us after trying two other routes: a general handyman who “knows gates” and a national chain that never sent the same person twice. We only do gates and gate motors. Nothing else. That’s why we stock FAAC, Linear, and Viking parts locally in Austin, and why our techs don’t need to make three trips to diagnose what should have been obvious on the first.
Cole Rafferty leads our Austin team and has been training gate-specific technicians since before most of the builder-grade operators in Steiner Ranch were installed. We answer the phone with a live person 24 hours a day, seven days a week, because a gate that won’t close at 10 p.m. is a security problem, not a scheduling problem.
Styles & brands we work with
Metal Gate Repair in Austin
Metal gate repair in Austin covers steel, iron, and aluminum gates, and the work here is shaped by two forces most other Texas cities don’t deal with the same way: Blackland Prairie clay and UV that cooks south- and west-facing powder coat. In Allandale, we regularly see hinge post weld points rust through within a few freeze-thaw cycles, letting the entire panel sag toward the latch side. The fix is rarely a new gate. It’s re-welding the hinge, replacing the post base if it’s rotted, and re-shimming the panel so it swings true.
Hinge and Post Repair in Austin’s Clay Soil
Austin’s Blackland Prairie clay expands when wet and shrinks when dry. A gate post set in unreinforced concrete heaves a quarter inch one season, drops back the next, and eventually the gate binds at the latch. We re-set posts with deeper footings and proper drainage so the same failure doesn’t come back in twelve months.
Weld and Rust Repair for South- and West-Facing Gates
Intense Austin sun fades powder-coat fast, and once the coating cracks, rust starts at the welds. On many Austin iron gates, the bottom rail rusts from the inside out because sprinkler overspray hits it every morning. We grind back to clean metal, re-weld, and re-coat with a finish meant for Central Texas UV. Expect $180 to $340 for hinge repair and re-alignment, and $400 to $900 for weld repair that includes re-coating a section.
Wood Gate Repair in Austin
Wood gate repair in Austin shows up most in the 1940s through 1960s neighborhoods: Crestview, Allandale, North Loop. Those original tube-steel or cedar gates were built into slab-on-grade homes, and the gate posts were often set in concrete that’s now 60 years old and cracking. In Crestview specifically, we see manual gates that were never wired for automation, and the old concrete crumbles when we drill for conduit. That means a new post footing before any opener or keypad goes in.
Sagging and Rot in Austin’s Ranch-Style Homes
Cedar gates in central Austin pick up moisture at the bottom rail and sag at the latch side. The diagonal brace should run from the top hinge down to the bottom latch corner. When it’s installed the wrong way, the gate sags within a year. We rebuild the frame, re-hang the panel, and replace hardware with stainless steel that survives the humidity. Typical wood gate repair in Austin runs $220 to $420 depending on how much of the frame needs replacing.
When the Post Is the Real Problem
If the post wobbles when you push the gate, the wood is fine. The problem is what’s underground. Austin’s expansive clay is the culprit. We pull the old post, dig a deeper footing, and set a new post in concrete with gravel drainage at the base. That’s the only fix that survives a wet spring followed by an August drought.
Trusted Brands We Service in Austin
We’re factory-trained on FAAC, BFT, Linear, and Viking equipment, and we carry the common replacement parts for those brands in our Austin stock. That means a BFT control board or a Linear actuator doesn’t require a week of shipping from out of state. If your opener was installed by a builder, chances are it’s a Linear or Viking unit that was sized for a lighter gate than what’s actually hanging on it. We’ll tell you honestly if the motor is too small for the panel, and quote the correct retrofit before any parts get ordered.
Common Gate Repair Problems We See in Austin Homes
- Builder-grade openers overworked in Steiner Ranch. Heavy iron driveway gates on new construction in Steiner Ranch often come with an opener rated for half the actual gate weight. By the second summer, the motor overheats and strips the rack and pinion. We replace the drive assembly and size it for the real load.
- Manual Crestview gates that can’t take automation. Those 1950s tube-steel walk gates were never meant to carry a solar opener or keypad. The original post concrete crumbles when drilled for conduit. We set new footings first, then install the automation.
- Magnetic locks releasing by themselves in Mueller. Mueller’s brownouts drop voltage during July, and magnetic locks on aluminum pedestrian gates trip open when the low-voltage supply dips. We add a dedicated 12V battery backup and check the transformer.
- Sagging iron gates in Westlake. Heavy automation-heavy iron panels on Westlake properties put constant load on the hinge post. When the weld points at the post base fatigue, the entire panel sags at the latch side. Re-welding and re-setting the post fixes it without replacing the gate.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Austin, TX
Most gate repairs in Austin fall into predictable ranges. Hinge and latch work runs $180 to $340. Opener and motor repair, including a new circuit board or actuator, runs $260 to $480. A full post replacement with new concrete and re-hanging the gate runs $600 to $1,400 depending on how deep the footing needs to go and whether we’re adding automation conduit at the same time. Weld repair with re-coating runs $400 to $900 per section. Every price is written down and agreed before we start. Call (361) 268-6253 for a free estimate and we’ll send the written quote to your phone.
We Also Serve Cities Near Austin
Our Gate Repair team covers Austin and the surrounding metro, including Cedar Park, Manor, Buda, and Hutto. If you’re outside the city limits, we still dispatch from our Austin office, so you get the same written-price standard and the same name-and-photo technician process. Gate Repair in Austin is our home base, and we know the neighborhoods, the soil, and the builders’ shortcuts that show up across this area.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Austin
July brownouts in Mueller drop the voltage to your gate’s magnetic lock, and the lock releases because it’s not getting enough low-voltage power to hold. The fix is a dedicated 12V battery backup and verification that the transformer is sized correctly. We see this every summer in Mueller, and it’s almost never the lock itself. Call (361) 268-6253 and we’ll check the power run first.
Yes, but the first step is almost always a new post footing, not the opener. Those original Crestview posts were set in concrete that’s now crumbling, and drilling for conduit will shatter it. We set new footings, run the low-voltage wire, then install the opener, keypad, and safety photocells. Expect $800 to $1,600 for the full job depending on the opener you choose. Estimates are free.
No, you need hinge repair and likely a re-set post. The panel itself is fine; the weld points at the hinge post base have fatigued, and the weight of the iron is pulling the whole gate down at the latch side. We re-weld, re-shim, and re-hang the panel. That job typically runs $300 to $700. Call (361) 268-6253 for an exact quote before you consider replacing a perfectly good gate.
Yes. UL 325 requires a monitored safety device that reverses the gate if a vehicle is in the path, and for slide gates that’s almost always a loop detector buried in the driveway. Circle C’s HOA rules also typically require it. We install the saw-cut loop, the detector module, and the safety photocells as part of any slide gate repair or opener replacement.
Winter sun angles in Steiner Ranch don’t give your solar panel enough direct exposure, and the battery isn’t holding a charge from the shorter days. The panel may be clean, but it’s undersized for a December sky. We either add a second panel, move the panel to a south-facing mount, or add an AC trickle charger. Call (361) 268-6253 and we’ll test the battery before recommending anything.
Call Warden Gate Repair Austin for a Written Price
If your gate won’t close, won’t open, or won’t stop making noise, call (361) 268-6253. We’ll ask a few questions, give you a straight answer, and send a technician whose name and photo you’ll know before they arrive. The written price comes before any work starts. That’s the Warden way: a gate is meant to keep things secure, and the person fixing it should be someone you can trust at your door.
Written by Cole Rafferty, Owner at Warden Gate Repair Austin.