Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Austin, TX
Hinge and post repair in Austin typically costs between $240 and $520 for most residential gates, with post replacement running higher when concrete work is involved. That’s the honest range we quote most often for gate repair in Austin. If your gate drags on the ground, won’t close fully, or the post visibly leans after a hard Texas storm, the hinges and posts are usually the culprit, not the opener. Call us at (361) 268-6253 and we’ll tell you exactly what’s wrong and what it costs to fix before any work begins.
We’re a gate-only shop. We don’t do fences, decks, or general handyman work. What we do is Gate Repair in Austin, and a huge share of the calls we get are for gates that stopped swinging right. Most of the time, that comes down to two parts doing more work than they should: the hinges that carry the weight, and the post that holds everything up. When either one fails, the whole gate suffers. And in Austin, where limestone soil shifts and summer heat bakes metal fittings, both fail more often than people expect.
Cole Rafferty leads our Austin team, and the standard he set is simple: you should know who’s coming to your door and what it will cost before you commit. That’s why every Warden technician is background-checked, identity-verified, and photo-badged under our Threshold Standard, and why you get a written price before any work starts. No gate repair company in Austin should ask you to open your door on a guess.
When You Need Hinge & Post Repair
Hinges and posts don’t fail quietly. They tell you, in ways that are easy to spot once you know what to look for:
- The gate sags toward the latch side. You have to lift the gate to get it to close. The top hinge has stretched or the post has started leaning under the weight.
- The gate scrapes the ground or the concrete pad. That’s a hinge problem, not a wheel problem. On a swing gate, there are no wheels, so any ground drag points straight at worn hinge pins or a shifted post.
- The gate won’t stay open or closed. If it swings on its own, the post is out of plumb. In Austin, piers set without enough depth shift in the clay soil during wet-to-dry cycles. We see it all over neighborhoods like Allandale, Brentwood, and Circle C.
- Rust staining below the hinge plate. Water gets into the hinge barrel, rusts the pin, and eventually seizes it. Gate motors then overdraw and burn out trying to move a gate the hinges won’t let move.
- The post wobbles when you push the gate. That’s a structural failure, not a nuisance. A gate that can fall is a safety hazard, especially around kids and pets.
- Squealing or grinding at the hinge line. Metal-on-metal wear without lubrication. It means the hinge has already started to deform and greasing it will only buy days, not months.
If any of these sound familiar, call (361) 268-6253. You’ll talk to a live person. We’ll ask you what the gate does, what kind of opener you have, and what the post is set in. Then we’ll give you a realistic idea of what the fix involves before we ever send a truck.
Our Hinge & Post Repair Process
We built our process around one question: what would make a homeowner comfortable opening the door to a repair technician? Here’s exactly how a hinge or post repair with Warden Gate Repair Austin goes:
- You call and talk to a person. Not a phone tree. Our live-answer line is staffed 24/7. You describe what the gate is doing, we ask a few targeted questions about the hinges, the post, and the opener brand.
- We send a name and a photo before we send the tech. Before arrival, you get a text or email with the technician’s name, photo, and background-check confirmation. That’s our Threshold Standard, and it applies to every single visit, no exceptions.
- The technician inspects and writes the price down. On site, the tech checks the hinge pins, the post foundation, the mount plates, and the gate motor’s current draw if you have an opener. Then you get a written price for the exact repair. You approve it before anything gets touched.
- We do the repair with parts matched to your gate. Whether the gate swings on heavy-duty ball-bearing hinges or simple barrel hinges, we use appropriately rated hardware. For post work, we set new posts below the frost line with proper concrete and let it cure before remounting the gate.
- We test the full swing under power. If you have an automatic opener on a Ghost Controls, DoorKing, or Mighty Mule system, we run the gate through full open and close cycles under load to make sure the new hinges or post aren’t just holding, they’re balanced. A hinge that binds under motor torque will fail again.
- You get the Done Right Promise in writing. Every repair is backed by our 365-Day Done Right Promise. If the hinge or post repair fails within a year, we come back and make it right at no charge. That’s in the written guarantee you get before we leave your driveway.
Hinge & Post Repair Pricing in Austin
We charge the same flat, written price for hinge and post work whether you live in Hyde Park, Mueller, or out toward Dripping Springs. No surprise line items at the end. Here’s what you’re actually paying for in the Austin market:
Typical Hinge & Post Repair Costs in Austin
| Repair Type | Typical Range | What It Includes |
|---|---|---|
| Single hinge replacement (standard barrel) | $85 – $150 | New hinge, removal of old hardware, alignment, lubrication |
| Heavy-duty ball-bearing hinge replacement | $180 – $320 | Rated hinge for oversized gates, mounting hardware, alignment |
| Post straightening (minor lean, no concrete work) | $150 – $300 | Plumb correction using shims or re-securing existing footing |
| Full post replacement (single post, new concrete) | $400 – $700 | Old post removal, new steel post, concrete set and cure, remount |
| Hinge + post repair bundle (most common) | $240 – $520 | New hinges plus post correction, full alignment, motor test |
Three things move the price in Austin specifically. First, the soil. Much of Austin sits on Blackland Prairie clay that expands when wet and shrinks in the heat. Posts set without deep enough concrete start shifting within a few seasons. Second, the gate weight. A custom iron gate from a builder on the west side weighs a lot more than a pre-hung steel gate from a big-box store, and heavier gates need heavier hinges and deeper post footings. Third, the automatic gate repair strain. A gate that’s been binding for months often wears out the operator arm or gear, and if that happened, the repair bill stretches beyond the hinge itself. We’ll tell you if we see that, before we fix anything.
We give free estimates for hinge and post work in the Austin area. Call (361) 268-6253, tell us what your gate is doing, and we’ll come out, assess it, and hand you a written number. You’re never obligated to approve it.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Austin?
Most hinge and post repairs in Austin run between $240 and $520, with full post replacement costing more when new concrete is required. The exact price depends on gate weight, the condition of the post footing, the soil around your property, and whether the gate motor was damaged by the bind. Call (361) 268-6253 for a free written estimate from Warden Gate Repair Austin.
Can you fix a leaning gate post the same day?
Yes, minor post straightening that doesn’t require new concrete can usually be done the same day in Austin. If the post foundation is cracked or the post has rusted through at the base, we need to dig out the old footing and pour new concrete, which adds a day for curing. We’ll tell you which situation you have after the inspection.
Is it cheaper to repair hinges or replace the whole gate?
In nearly every case, repairing hinges is far cheaper than replacing the gate. A hinge replacement runs $85 to $320, while a new gate plus installation can run $1,500 to $5,000 or more depending on size and material. The exception is when the gate frame has rusted through where the hinge mounts, in which case weld & rust repair rarely holds. We’ll show you the condition of the metal before recommending anything. Call (361) 268-6253 and we’ll assess it honestly.
Do you repair hinges on automatic gates with Ghost Controls or Mighty Mule openers?
Yes. We service gate hinges and posts on gates equipped with Ghost Controls, Mighty Mule, DoorKing, Elite, and other automatic openers in the Austin area. The hinge and post work is the same skill set, but we always run the full open and close cycle under power after we finish to make sure the opener isn’t fighting the new hardware. If the motor needs lock repair adjustment after the hinge repair, we’ll include that in the written quote upfront.
How long do gate hinges and posts last in Austin?
In Austin’s climate, standard barrel hinges last 5 to 8 years, while heavy-duty ball-bearing hinges can run 12 to 15 years with periodic lubrication. Steel posts set in concrete can last 20 years or more in good soil, but clay-heavy areas like parts of East Austin and the Mueller district can shorten that dramatically if the footing isn’t deep enough or drainage is poor. The fastest way to know is to have the hinge and post inspected.
Why Austin Homeowners Choose Warden Gate Repair
A warden is someone trusted to watch over a place and keep it secure. That’s the whole idea behind the name, and it’s the standard we hold every technician to. When you book a hinge or post repair with us, you’re not getting an anonymous contractor. You’re getting a named, photo-badged, background-checked professional who arrives with a written price and leaves with a written guarantee.
We’ve been repairing gates since 2008 as part of the Threshold Group family. We’re an independently owned and operated Austin location, and our entire focus is gates. Swing gates, slide gates, driveway gates, pedestrian gates, and the motors that move them. That focus matters when you’re dealing with hundreds of pounds of steel swinging on two hinges. A hinge repair done wrong doesn’t just sag. It can let a gate fall on a person, a car, or a pet. We take that seriously.
Every repair, hinge or post or motor, comes with our 365-Day Done Right Promise. If the repair isn’t right within a year, we return and make it right at no charge. That’s the guarantee, in writing, on every job. No fine print, no prorating, no question about whether we’ll stand behind the work.
If your gate is sagging, scraping, or the post is leaning in Austin, call (361) 268-6253. A real person answers, day or night. We’ll get you a name, a photo, and a written price. Then we’ll fix the gate the way it should have been hung in the first place.
Written by Cole Rafferty, Owner at Warden Gate Repair Austin, serving Austin.