Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Brushy Creek, TX
Gate repair in Brushy Creek, TX usually costs between $185 and $540, depending on whether it’s a mechanical fix on a steel driveway gate or an automated opener that’s stopped working. Most jobs on this side of Round Rock and Cedar Park involve the heavy, automated wrought-iron and steel gates that came with the area’s larger 1980s-to-2000s estate-style homes. We’re Warden Gate Repair, and if you need a gate or gate motor looked at in Brushy Creek, call us at (361) 268-6253 and you’ll get a written price before any work begins.
Why Brushy Creek Homes Are Different
Brushy Creek’s gate work is shaped by something most repair companies don’t plan for: the original gate automation. A lot of homes in the older sections near Brushy Creek Lake and along O’Connor Drive still run 1990s-era linear actuators, and many of them are failing the same way, with circuit boards cooked by central Texas heat and plastic gears that have gone brittle. The good news is the steel frames underneath are often still straight and solid, so we retrofit the motor and controls rather than sell you a whole new gate you don’t need.
The other thing that sets Brushy Creek apart is the sun and the storms. UV exposure here breaks down powder coating faster than you’d expect, and the hail that rolls through in spring can dent a gate panel or crack an opener housing in minutes. Homes in HOA-governed communities also tend to have decorative metal driveway gates with specific finish and setback rules, which means the fix has to be done right the first time, and it has to look like it belongs. Our crews plan for all of that before they arrive.
Styles & brands we work with
Our Main Brushy Creek Services
These are the three jobs Brushy Creek homeowners call about most. Each one has its own page with the full local detail.
Gate Repair in Brushy Creek
This is the catch-all for a gate that won’t close, sagged on its hinges, scrapes the driveway, or sits crooked after a storm. In Brushy Creek we’re usually working on decorative steel or wrought-iron driveway gates that were installed when the home was built and have shifted over the years as the clay soil moved. We bring the gate back to level, address the rust before it spreads, and replace hinges, posts, or pickets as needed. Gate Repair in Brushy Creek covers the full process.
Electric Gate Repair in Brushy Creek
When the gate has an opener and it stops responding, that’s electric gate repair. In Brushy Creek the heat is the usual culprit: control boards, sensors, and limit switches sit in direct sun inside metal boxes and degrade faster than the same parts would in a milder climate. We diagnose the full path, from the keypad or remote to the motor, and quote the fix before touching anything. Electric Gate Repair in Brushy Creek walks through what we test and why.
Gate Motor Repair in Brushy Creek
The gate motor, the box that slides or swings your gate automatically, is the heart of an automated gate. In Brushy Creek’s older neighborhoods we see 1990s linear actuators that are worth saving, plus newer swing and slide operators from Viking, FAAC, and Linear that need specific replacement parts. We stock common boards and gears and can often complete a motor repair the same visit. Gate Motor Repair in Brushy Creek explains the repair-versus-replace decision.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Brushy Creek
Our techs are factory-trained on FAAC, BFT, Linear, and Viking equipment, and we keep the most common Brushy Creek parts on the truck: circuit boards, limit switches, remote receivers, and gear kits. That usually means a one-visit repair instead of a week waiting on a shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Brushy Creek, TX
| Service | Typical range in Brushy Creek |
|---|---|
| Gate realignment and hinge repair | $185 – $320 |
| Wrought-iron rust repair and repaint | $240 – $460 |
| Gate post reset (shifting clay soil) | $310 – $540 |
| Operator troubleshooting and diagnostics | $120 flat, waived with repair |
| Control board replacement | $260 – $440 |
| Safety sensor and limit switch replacement | $150 – $260 |
| Remote or keypad programming | $95 – $165 |
| Gate motor replacement (swing or slide) | $480 – $890 |
Prices in Brushy Creek run toward the upper end of these ranges when a gate is heavily rusted, the post has shifted in clay soil, or the operator is an older 1990s unit that needs retrofitting rather than a simple part swap. Whatever the number ends up being, you’ll see it in writing before we start, and that’s the number you’ll pay.
Neighborhoods We Serve in Brushy Creek
We cover all of Brushy Creek, including the HOA-governed sections where gate specs are stricter. Most repairs are scheduled within one to two business days, and we can reach any address in the area quickly from the Austin dispatch office.
- Brushy Creek North
- Brushy Creek South
- O’Connor Drive corridor
- Great Oaks area
- Sam Bass Road to Brushy Creek Road
Service Area – Cities Near Brushy Creek
If you’re just outside Brushy Creek, we serve the surrounding Williamson and Travis County communities as well: Austin, TX, Cedar Park, TX, San Marcos, TX, and Hutto, TX. Same name, photo, and written-price standard on every visit, whichever city you’re in.
Serving Brushy Creek, TX - Our Local Coverage Area
We’re based in the Brushy Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Brushy Creek
Most non-emergency Brushy Creek repairs are scheduled within one to two business days. For a gate stuck open or a security issue, call us right away at (361) 268-6253. A live person answers 24/7, not a voicemail.
They sometimes do. Several Brushy Creek communities have finish, height, and setback requirements for driveway gates. We match materials and colors to what’s already there, so a repair rarely needs new HOA approval. If a full replacement is ever needed, we’ll tell you before the work starts.
The tech’s name and photo are sent to you before arrival, and they’ll show a photo ID badge at the door. Every Warden Gate Repair technician is background-checked and identity-verified under our Threshold Standard.
If your gate is sagging, rusting, or no longer opening, call (361) 268-6253 for a free estimate. You’ll get the exact price in writing before any work starts, and the 365-Day Done Right Promise behind it.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Brushy Creek Customers Say
"Gate was closing on my truck bumper. The loop detector had failed. Replaced it and adjusted the force setting."
- Dina K."Slide gate stopped halfway and the motor just hummed. Tech showed his ID, tested the limit switch and found a worn roller wheel. Replaced both and the gate glides again."
- Curtis B."Rusty chain drive got cleaned, lubed, and re-tensioned. He told me what to do each year to keep it going."
- Leon M.