Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Cedar Park, TX
We’re a gate company serving Cedar Park, TX with repair work on automatic driveway gates, electric openers, and gate motors. Most Cedar Park homes were built from the 1990s forward, which means ornamental steel and aluminum gates on automated systems, often on large lots with perimeter fencing. The expansive clay soil underneath Cedar Park shifts through wet and dry seasons, and that movement slowly knocks gate posts, hinges, and sensors out of alignment. The result is a steady need for adjustment, realignment, and opener repair rather than whole-gate replacement. Call (361) 268-6253 and you’ll get a live person, a straight answer, and a written price before any work begins.
Why Cedar Park Homes Are Different
Cedar Park’s housing stock grew in a burst after 2000, and the gates those homes carry are almost always ornamental steel or aluminum paired with automated sliding or swing openers. That’s one side of the picture. The other side is what the ground does. Cedar Park sits on expansive clay soil, the kind that swells after rain and contracts during the long dry stretches central Texas gets most years. A gate post set in that soil can drift a quarter inch in a season, and a quarter inch is enough to make a slide gate drag, a swing gate bind against its latch, or a photo eye send false signals to the control board. Droughts make it worse because the contraction happens unevenly. The posts nearest a driveway edge, where runoff is heaviest, move differently than the ones back near the house.
Our techs also plan around Cedar Park’s summer thunderstorm pattern. When lightning moves through, power surges ride the lines and find their way into circuit boards on LiftMaster, DoorKing, and Elite openers. We regularly replace boards after a storm, often in gates that worked fine the day before. The work in Cedar Park tends to be adjustment and reinforcement first, component-level repair second, and full replacement only when a gate or operator has genuinely reached the end of its life. That order matters because it keeps repair bills honest and keeps perfectly functional gates out of the landfill.
Styles & brands we work with
Our Main Cedar Park Services
Most Cedar Park homeowners call us for one of three things: a gate that won’t open or close properly, an electric opener that has stopped responding, or a gate motor (the box that slides or swings your gate automatically) that runs but won’t move the gate. Each service has its own dedicated page with local pricing and specifics.
Gate Repair in Cedar Park
Gate repair in Cedar Park usually means a steel or aluminum gate that has gone out of square because the post beneath it shifted in clay soil. We straighten the post, add reinforcement where the gate hangs, realign hinges and sensors, and reset the opener’s travel limits so the gate closes cleanly without slamming. We also handle broken welds, bent frames, damaged rollers, and gates that sag after years of Texas sun. The job often starts with a diagnosis call and ends the same day with the gate moving smoothly again. See the full breakdown on our Gate Repair in Cedar Park page.
Electric Gate Repair in Cedar Park
When an electric gate stops responding to the remote, keypad, or safety sensor, the problem is usually electrical: a dead transformer, a short in the underground wire, a fried circuit board, or a photo eye that has drifted out of alignment after a storm. We work on the low-voltage side of the system, testing each component in sequence so we replace only what actually failed. Cedar Park’s clay soil also shifts underground conduit, which can pinch wires and cause intermittent faults that frustrate homeowners for months. Details and local pricing are at Electric Gate Repair in Cedar Park.
Gate Motor Repair in Cedar Park
The gate motor, the box that slides or swings your gate automatically, works hard in Cedar Park’s heat. Thermal expansion stresses the gears and drive chains, while dust from dry spells works into the housing. We service the full drive train: motors, gearboxes, limit switches, control boards, and remotes, with parts matched to your specific opener brand rather than a generic substitute. We also handle intermittent motor failures before they strand the gate half-open. Read more on the Gate Motor Repair in Cedar Park page, which covers pricing for the common motor jobs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Cedar Park
We carry parts and service documentation for DoorKing, Elite, Mighty Mule, and LiftMaster, along with five other major gate and opener lines. We keep common circuit boards, limit switches, and remote receivers on the truck, so many Cedar Park repairs finish in one visit. See our brands for the full list and what we stock.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Cedar Park, TX
| Service | Typical range in Cedar Park |
|---|---|
| Gate diagnostic visit | $49 – $89 |
| Gate roller replacement | $150 – $300 |
| Gate hinge replacement or repair | $120 – $250 |
| Gate post realignment | $200 – $400 |
| Gate opener repair (component-level) | $180 – $350 |
| Gate opener circuit board replacement | $250 – $500 |
| Gate motor replacement | $450 – $900 |
| Safety sensor or photo eye replacement | $150 – $300 |
| Keypad or remote programming | $75 – $150 |
| Full gate opener replacement (parts and labor) | $800 – $1,800 |
The biggest driver of cost in Cedar Park is a gate post that has shifted far enough to need concrete work or full re-setting, which moves a job from simple alignment into the higher end of the range. The second common driver is opener age: a 2005-era board that’s been through a decade of summer surges is usually replaced, not patched. Whatever the job, the price is written down and agreed to before any work starts. No surprise line items at the end, no vague estimate that balloons after the tech is already in your driveway.
Neighborhoods We Serve in Cedar Park
Cedar Park spreads across a wide band of Williamson County, and our techs are on the road throughout it every week. We carry the common parts for the gate brands most often installed in Cedar Park’s newer subdivisions, so first-visit fixes are common. Most Cedar Park calls get same-day or next-day scheduling depending on the time of day you call.
- Ranch at Brushy Creek
- Forest Oaks
- Buttercup Creek
- Twin Creeks
- Anderson Mill West
Service Area – Cities Near Cedar Park
Beyond Cedar Park, our crews cover the wider Austin metro. That includes Austin, TX, Hutto, TX to the east, Manor, TX further out on the 290 corridor, and Buda, TX south of the river. If your address sits near a Cedar Park boundary line, call us and we’ll confirm coverage for your street before you schedule anything.
Serving Cedar Park, TX - Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cedar Park
We schedule same-day or next-day appointments for most Cedar Park addresses, with emergency response available 24/7 for a gate stuck open or a security gate that won’t close. Live phone coverage runs all day, every day, so you reach a person, not a voicemail. Call (361) 268-6253 and we’ll tell you the soonest window for your street.
Repairing an existing gate or opener, keeping the same footprint and style, rarely requires HOA approval in Cedar Park, but some communities with strict architectural review boards want notice before a full replacement. We can document the existing setup and the replacement plan. The cleanest approach is to check your community’s covenant, and we’ll match the work to whatever it requires.
Not necessarily. Once a post is reinforced or re-set with the soil movement in mind, the gate tends to stay stable for years. The gates we revisit most are the ones that never got proper post depth or concrete reinforcement when the home was built, usually the original developer installation. After we correct that, clay soil becomes a maintenance note, not a yearly emergency. Call (361) 268-6253 for an exact assessment of your gate and property.
For gate repair, electric opener work, or gate motor service in Cedar Park, call Warden Gate Repair at (361) 268-6253. You’ll get a written price before any work begins, a technician introduced by name and photo before arrival, and a repair backed by the 365-Day Done Right Promise. If the fix isn’t right, the return visit is free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cedar Park Customers Say
"Slide gate stopped halfway and the motor just hummed. Tech showed his ID, tested the limit switch and found a worn roller wheel. Replaced both and the gate glides again."
- Curtis B."Rusty chain drive got cleaned, lubed, and re-tensioned. He told me what to do each year to keep it going."
- Leon M."Remotes were out of range. He replaced the antenna and re-paired the remotes. Works from the street now."
- Valerie T.