Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Shady Hollow, TX
If you live in Shady Hollow and your gate won’t open, won’t close, or groans loud enough to wake the neighbors, you need a gate company that knows this specific patch of south Austin. Gate repair in Shady Hollow means working on large-lot ranch-style homes built from the 1970s onward, many with original opener motors, long driveways, and steel or iron gates that have been through decades of Hill Country heat. The sun, the clay soil, and the deer pressure all shape what fails and how we fix it. Call (361) 268-6253 and you’ll get a live person, a straight answer, and a written price before any work starts.
Why Shady Hollow Homes Are Different
Shady Hollow isn’t a neighborhood of cookie-cutter houses with matching gates. The streets wind through a mix of 1970s and 1980s custom builds, many on half-acre to multi-acre lots, with driveways that run long enough that a gate opener isn’t a convenience, it’s how you get in and out without a hike. The original gate systems on these properties are often 30 to 40 years old. Motors wear out, controller boards fail, and parts that were common in 1985 are now obsolete, which means a retrofit rather than a simple part swap.
The Hill Country environment compounds it. Shady Hollow sits on expansive clay soil that swells when wet and cracks when dry, and that movement shifts gate posts. A gate that swung straight for fifteen years can start binding against the ground or the latch because the post has drifted. Then there’s the summer heat. Circuit boards, plastic gears, and grease all degrade faster under relentless sun. And the rock. Limestone sits close to the surface in much of Shady Hollow, so resetting a post or installing a new gate often means drilling through stone, not digging through soft dirt.
Deer are a constant too. Many Shady Hollow properties have deer-proof fencing integrated with their gate, which changes how the gate is hung, how the opener is sized, and what happens when a buck tests it at 2 a.m. These aren’t simple suburban gates. They’re custom, they’re heavy, and they need a technician who’s seen what Shady Hollow throws at them.
Styles & brands we work with
Our Main Shady Hollow Services
Shady Hollow homeowners call us most often about two things: a gate that has stopped moving at all, and an opener that runs but can’t shift the gate. Here’s what each of those jobs actually involves in this part of town.
Gate Repair in Shady Hollow
A gate that drags, swings crooked, or won’t latch usually traces back to two things in Shady Hollow: shifted posts from the clay soil, or wear in the hinges and rollers from the heat. We inspect the post alignment, the hinge condition, and the gate leaf, then give you a written price to correct it before we touch a tool. If your gate has been binding since the last dry summer, the fix is usually post adjustment and hinge replacement rather than a whole new gate. Gate Repair in Shady Hollow covers the full scope.
Electric Gate Repair in Shady Hollow
When the opener hums but the gate doesn’t move, or the keypad flashes and nothing happens, the problem is usually in the control system, the wiring, or the safety loop. Shady Hollow’s older properties often have original armored cable run across long distances that breaks down over time, and newer safety sensors get nudged out of alignment by the same soil shifting we see everywhere else here. We test the full circuit, identify the failed component, and quote the replacement in writing. Electric Gate Repair in Shady Hollow goes deeper into the process.
Gate Motor Repair in Shady Hollow
The gate motor, the box that slides or swings your gate automatically, takes the worst of the Shady Hollow environment. Heat, dust, and daily cycles wear out gears and capacitors faster here than in milder climates. Many older motors can be rebuilt or fitted with a retrofit board that brings them up to current safety standards without replacing the entire operator. When the motor has to be replaced, we carry options for most applications and can usually complete the swap in a single visit. Gate Motor Repair in Shady Hollow explains the motor-specific work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Shady Hollow
We’re factory-trained on the brands that show up on Shady Hollow gates, including FAAC, BFT, Linear, and Viking. We stock the most common boards, gears, and remotes on the truck, and we can order anything unusual fast through our shop. See our brands for the full list and what each one typically needs.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Shady Hollow, TX
| Service | Typical range in Shady Hollow |
|---|---|
| Gate repair service call and diagnosis | $75 – $150 |
| Gate opener repair (common parts) | $180 – $340 |
| Gate motor replacement (standard swing or slide) | $600 – $1,400 |
| Control board replacement | $220 – $480 |
| Safety sensor replacement (photo eyes or edge sensors) | $150 – $320 per pair |
| Hinge and roller replacement | $120 – $350 |
| Post realignment (shifting from clay soil) | $250 – $750 |
| Keypad or remote programming | $60 – $140 |
| Gate opener full installation (retrofit on existing gate) | $1,200 – $3,000 |
Shady Hollow prices run toward the upper end of these ranges when a gate post has drifted on clay soil and has to be reset in limestone, or when an obsolete opener needs a full retrofit rather than a board swap. Whatever the number, you’ll see it in writing and agree to it before we start. No surprise line items at the end, ever.
Neighborhoods We Serve in Shady Hollow
We cover the full Shady Hollow area, including its distinct pockets and the surrounding streets that share the same terrain and gate styles.
- Shady Hollow Estates
- The Hollows at Shady Hollow
- Shady Hollow West
- Academy Estates
- Brodie Springs
Response time across the Shady Hollow area is typically same day or next day for gate failures, and we prioritize gates that won’t close at all since that’s a security issue for your whole property.
Service Area – Cities Near Shady Hollow
We also serve the surrounding communities with the same upfront pricing and the same 365-Day Done Right Promise. If you’re located just outside Shady Hollow, we work regularly in Austin, TX, Cedar Park, TX, San Marcos, TX, and Hutto, TX.
Serving Shady Hollow, TX - Our Local Coverage Area
We’re based in the Shady Hollow area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Shady Hollow
For a gate that won’t open or won’t close, we can usually have a technician in Shady Hollow the same day or the next morning. Gates that won’t secure are treated as a priority, because an open gate on a long driveway means your property is exposed. Call (361) 268-6253 and the dispatch team will give you a real arrival window, not a vague “sometime this week.”
Most gate repairs in Shady Hollow, like motor replacement, board swaps, and hinge work, don’t require a permit because nothing structural changes. If your gate faces a deed-restricted road or your HOA has specific appearance rules, we can work with you on what the repair will look like and provide documentation if your association asks. New gate installations sometimes need property-line verification, but repairs almost never do.
Yes, and that’s most of what we see in Shady Hollow. Older LiftMaster, Linear, and Viking systems from the 1980s and 1990s often have parts that are no longer manufactured, but we carry retrofit boards and universal receivers that bring those systems back online without ripping out the whole gate. The goal is to keep your original gate and posts whenever they’re still sound. Call (361) 268-6253 for a free estimate and we’ll tell you exactly what’s possible with your equipment.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Shady Hollow Customers Say
"Gate was closing on my truck bumper. The loop detector had failed. Replaced it and adjusted the force setting."
- Dina K."Slide gate stopped halfway and the motor just hummed. Tech showed his ID, tested the limit switch and found a worn roller wheel. Replaced both and the gate glides again."
- Curtis B."Rusty chain drive got cleaned, lubed, and re-tensioned. He told me what to do each year to keep it going."
- Leon M.